Drilling Fluid Additives
Drilling fluid additives refer to a class of additives used in the process of oil and gas drilling, recovery and transmission, water quality treatment, and recovery enhancement. It has a wide variety. Due to the different reservoir conditions and the different properties of crude oil, water quality, and rocks, the drilling fluid additives used are highly targeted.
Drilling fluid additives belong to drilling mud chemicals. It is also an additive of oil drilling chemicals.
Drilling fluid additives are widely used as drilling mud performance modifiers in oil recovery. The role of the additive is to regulate the rheology of the mud drilling fluid. This kind of drilling mud chemicals allows drilling fluids to carry rock chips, lubricate the drill bit, and facilitate drilling.
Drilling Mud Chemicals
In addition, drilling fluid additives can greatly reduce the occurrence of stuck drilling accidents, reduce equipment wear and save cost. Proper use of oil drilling chemicals can prevent well leaks and collapses. The drilling mud chemicals can make the good diameter regular.
Drilling fluid additives are also called drilling mud chemicals. It is used to aid the drilling of boreholes into the earth. Often used while drilling oil and natural gas wells and on exploration drilling rigs, drilling fluids are also used for much simpler boreholes, such as water wells. One of the functions of drilling mud is to carry cuttings out of the hole.
Oil Drilling Chemicals
Drilling fluid additives include reducing agents, weighting agents, viscosity enhancers, lubricants, and shale inhibitors, etc. These additives can make a positive difference in the performance of drilling fluids to meet oil drilling requirements.
Drilling fluid additives are also called drilling mud chemicals. It is used to aid the drilling of boreholes into the earth. Often used while drilling oil and natural gas wells and on exploration drilling rigs, drilling fluids are also used for much simpler boreholes, such as water wells. One of the functions of drilling mud is to carry cuttings out of the hole.
Drag Reducing Agent
Shale-Control Agent
Viscosifier
- Carboxy Methyl Cellulose (CMC) – OilDrilling Grade
- Polyanionic Cellulose (PAC)
- XanthanGum (oil drilling grade)
Dispersants
- Acrylic Acid-2-Acrylamido-2-Methylpropane Sulfonic Acid Copolymer (AA-AMPS)
- Acrylic Acid-2-Hydroxypropyl Acrylate Copolymer (IR-225)
- Acrylic Acid-Acrylate-Phosphonic Acid-Sulfosalt Tetra-copolymer (IR-241)
- Copolymer of Phosphono and carboxylic Acid (PCA)
- Hydrolyzed Polymaleic Anhydride (HPMA)
- Acrylic-acrylate-sulfosalt copolymers (IR-613)
- Carboxylate-Sulfonate-Nonion Tri-polymer (IR-3100)
- Polyepoxysuccinic Acid (PESA)
- Sodium of Polyaspartic Acid (PASP)